Loading...

Home > Problem With > Problem With DIRECT CD

Problem With DIRECT CD

Flag Permalink This was helpful (0) Collapse - Check this out!! Packet-written discs can take much longer, sometimes as long as a day, depending on the drive and the disc. To ensure the long-term availability of information on a disc that already has an adhesive label, the information on the disc should be copied to, and stored on, a disc without Advice for preventing buffer underruns is scattered throughout this FAQ. check over here

Dust can also spin off into the disc drive and collect on the laser head or other internal components. Be sure that there aren't environmental factors creating difficulties. I'm wondering if I was to put MyDVD back on my computer and then downloaded the "Patch" that is mentioned in this forum if the problem then would be "fixed". Microwaves in a microwave oven will destroy a disc. (It may also destroy your microwave oven because of the metal in the disc.) Information on the effects of radiation is currently http://www.file.net/process/directcd.exe.html

If you don't record the VideoCD data files in the correct format, you will find yourself running out of room. (The extra space is gained by throwing out error correction codes They're far more trouble than they're worth.Amazon has a rebate deal on a 256MB Sandisk USB Flash drive. If the failing system is running Windows XP, see http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q321640& for an article on using UDF discs under XP. One user thinks DirectCD.exe is dangerous and recommends removing it. 2users don't grade DirectCD.exe ("not sure about it").

  1. Any effect of light on the disc would involve degradation of the polycarbonate substrate (plastic) and would become noticeable only after several decades of exposure to daily storage facility lighting or
  2. Score UserComments directcd.exe is a part of Adaptec (now Roxio's) Easy CD/DVD Creator.
  3. They can also interfere with the ability of the laser to follow the data track in the disc.
  4. These problems haven't been reported for some time, however.

This initiative will eliminate the above problems and should be available on all new drives." If you want to share data between systems, and the remote system isn't guaranteed to have The firmware of the drive prevents any read beyond that point. Some game discs use a form of copy protection where bad sectors are deliberately placed on the original CD. Discs kept in a cooler, less-humid environment and not subjected to extreme environmental changes should last longer.

Even if the software is new enough to be compatible, there's some chance that your bug has already been fixed. Try this: Uninstall Easy CD Creator (if installed). The last item, (d) is something that even CD/DVD Diagnostic can have problems with, but it will allow you to access more data than Windows alone will.Q. Numerous CD vendors have noted that the thin protective lacquer coating can deteriorate from contact with certain solvents in markers.

It depends. Check your software version. Back to top #16 james_hardin james_hardin Digital Guru Digital Guru 10,000 posts Gender:Male Posted 02 November 2007 - 07:26 AM Ethan: Please report back as to whether this works??? Roxio took over the development of Adaptec's CD/DVD burning software several years ago.

In practice, however, the video files are stored on separate tracks, using CD-ROM/XA MODE-2 FORM-2. Super simple. (More detail in the forum post where I found it: http://www.sitepoint...ead.php?t=76081) Now for my frustrated two cents... Try letting the drive cool down (leave the machine off for a couple of hours if you have an internal drive). Only specially designed thermal printers—not thermal printers designed to print on paper—can be used to print directly on the surface of thermal printable CD-R discs.

Back to top #2 james_hardin james_hardin Digital Guru Digital Guru 10,000 posts Gender:Male Posted 26 May 2007 - 02:39 AM You installed an obsolete reader file. check my blog In some cases you might need to get rid of windows\system\iosubsys\scsi1hlp.vxd manually. The clock is tied into feedback mechanisms that keep the disc spinning at the proper speed. The disc is still spinning, but there's no data to write, so the recording process aborts.

If you have an older recorder, and it seems to be getting progressively worse over time, it may need to be cleaned. One way to tell the difference between the operating system rejecting the CD and the drive rejecting the CD is to unplug the SCSI or IDE cable from the back of This isn't a scientific test against measurable standards, but it works on consumer hardware. http://stricklandresearch.net/problem-with/problem-with-cmd-exe.html For full surface printing of either a CD or a DVD, a white, printable base coat is available. "Pit art" labeling, as an alternative to printing, avoids the flatness and balance

I do a lot of bulk printing on both paper and CDs and like that I can get good quality cheaply with Epson printers using continuous ink tanks. The packet-writing formatter in DirectCD 2.0a however (apparently) requires the disc to be totally empty, so you really have to do a full erase if the disc contained data previously. If you have the Roxio UDF reader loaded, whether manually or as part of installing DirectCD 3.x, the problem will occur.

It's possible the disc is physically damaged and can't be used.

Typing 'cd dirname~102' may fail while 'cd "Long File Names without the ~"' will work. Each involves a different technology to place inks on the printing surface of the disc; few inkjet-printable and thermal printable CD-Rs are interchangeable. Flag Permalink This was helpful (0) Collapse - Re: Direct CD "unstable" in Windows XP by Paul C / July 23, 2004 12:03 AM PDT In reply to: Re: Direct CD You need to use a program like Roxio's CD Copier or GoldenHawk's CDRWIN to copy the disc track-by-track, preserving the mode of the original.

If a DVD disc has data on both sides (double-sided), neither printing nor pit art may be used in the data area of the disc. See section (2-19) for the low-down on disc finalization. If such a printer exists.. http://stricklandresearch.net/problem-with/problem-with-aol-8-0.html If anyone has thoughte re this I will be very grateful.ethan [email protected] Back to top #14 gi7omy gi7omy Digital Guru Digital Guru 17,034 posts Gender:Male Location:Belfast, Ireland Posted 02 November 2007

DVDs are different; peeling a label off a DVD would not have the same adverse affect because the metal layer is not near the surface. Usually this is just a checkbox. Why are so few foods blue? Fiddling with the insides of devices you don't have manuals for is generally unwise, so don't go looking unless you're desperate.

Conditions That Affect CDs and DVDs next section in this report >> | previous section >> | report contents >>   CDs and DVDs can be reliable for many decades with Also, my Roxio programs are preinstalled programs (v9) so they are NOT full or trial versions. If that fails, a number of people have discovered that the problem is a faulty CD-R unit (similar behavior has been reported on Sony and HP units, which have different mechanisms). Then, they started to act like they didn't know me because I hadn't replied with the whole thread (which of course I had).