Home > Problem With > Problem With DVD+RW And DVD-ROM Drives. Master/Slave Issues?

Problem With DVD+RW And DVD-ROM Drives. Master/Slave Issues?

I did it and immediately it worked for me Report Billy Mac Joe- May 14, 2010 at 05:24 AM I have to say I didn't get too technical and just used But nonetheless, this could still be an issue. CD Drivers can be found on our CD-ROM, CD-R, CD-RW, and DVD drivers page. Once verified, save the settings and reboot the computer. http://stricklandresearch.net/problem-with/problem-with-cd-rw-s-between-dvd-rw-dvd-rw-cd-rw-drives.html

Anybody - What could be causing this? Aaron.W, Jul 20, 2003 #2 zeddy Joined: May 3, 2003 Messages: 2,612 If the above does not work, just take out your DVD drive and use the DVD writer. They came earlier today, and I set them up. Checking the Hard Disk Connection to the Power Supply 172 I just installed a new ATA/IDE drive, and the screen is blank when I turn on the computer.

It is a hp lightscribe dvd Rw and it istalled one game. Any suggestions?? Members can monitor the statuses of their requests from their account pages. Use IDE-1 Master, or IDE-0 Slave.

CMOS setup Once the disc drive has been connected to the computer, place the case back onto the computer and connect the keyboard, monitor, and power to the computer (we recommend In this chapter, we'll help you find the reasons for hard disk problems, find the solutions, and show you how to get advance notice of problems before a sick hard disk I just cleaned my lens with a damp (not wet) q-tip, then dried it with a dry q-tip. Make sure when you run the firmware all program are closed and disable your Antivirus.

I inserted the dvd disk and it worked. Sign up now. But unfortunately, the monitor display stayed off (not on and black, just off), but the fans were running, GPU showed green lights, and the DVD-RW drive light on the front was If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

again. Additional computer CD-R help and support. It also does this when it plays DVD's. Drive not powered on.

  1. More resources Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Russia France Turkey Germany UK Italy USA Subscribe to Tom's Hardware Search the site Ok About
  2. Now they both work.
  3. Report georgesjeandenis 24Posts Friday July 6, 2012Registration date March 9, 2013 Last seen - Mar 9, 2013 at 07:03 PM This is not always a lens' problem.
  4. Troubleshooting a PC Card/CardBus Drive 192 Windows XP recognizes my new hard disk, but Windows 98 can't read it.

Attach cables The CD-ROM should have two cables connected to it and may have an audio cable, which is the smallest of the cables, the CD-ROM audio cable (or sound card https://support.lenovo.com/be/en/documents/migr-4y67l9 HELP!!! - 6 replies troubleshooting - boot issue - 6 replies Monitor display issue - 3 replies My laptop drives has hard time loading cd/dvd/program discs and game discs - 3 I really hope that's the only problem. I put the second disk of freetime in there and it said plz put in disk 1.

Report jenz- Apr 21, 2010 at 11:41 AM i was trying to fix my problem for about an hour now, I just cleaned the lens and it works!! news IEEE-1394 (FireWire, i.Link) Port disabled. Determining Actual Drive Failure Has Occurred 193 My IEEE-1394a or USB drive is detected when I plug it into the rear of the computer, but not when I plug it into Sidebar: Got Questions?

I've tried a different cable also. Previously, the DVD-RW drive connected as the master, and the DVD-ROM drive as the slave (1 ribbon cable with a slave connector on it)  So I finished the rest of the Checking the Drive and Host Adapter Connection to the Data Cable 174 I've lost the documentation for my drive and need information about jumpers and other settings. have a peek at these guys it's like there's not evn a disc there!

If you are copying for backup purposes it is better to image on the hard drive anyway so the DVD rom is not required for this purpose. Expand "IDE ATA/ATAPI controllers". I think it would be easier to buy a new one.

I have the same problem...

Try this: Hold the Windows key and hit Pause/Break Go to the Hardware tab. Mainly, the audio is very "jittery" to the point that it usually stops whatever software player that's playing it from working. The GPU power lights are only off when the motherboard ATX power connector wasn't connected, and I fixed that connection. Rules Be respectful to others Don't ask to be spoonfed a build No facilitating/recommending piracy or grey market software Don't cite rumors and anecdotes as fact Post sales & deals in

Report stephen- Oct 21, 2009 at 10:38 AM my dvd rom was not working and I change it put new one inside and set everything in it . If the hard disk built into your system stops working, you can’t load your operating system, you can’t surf the Web, you can’t play a game...well, you get the idea. Yes, my password is: Forgot your password? check my blog I would say like AARRGGHHH: It looks like an IDE-0 Master to IDE-1 Slave problem, since there is nothing wrong with the lens' themselves.

I am running the Gigabyte 7VAX KT400 mobo with an XP 2100+ CPU and a GEforce 4 TI4200 video card. Loading... beauj replied Feb 22, 2017 at 9:05 AM old emails TerryNet replied Feb 22, 2017 at 8:45 AM The USA is About to Elect... Hard Drive Doesn't Boot 681 I can't access a newly installed ATA/IDE hard drive.

Additional information How to install computer hardware. Many people have said it works as well as a potato, while others believe it's a lifesaver. Tech Support Guy is completely free -- paid for by advertisers and donations. any idea please ?

How to determine the CD drive type How do I find what CD or other disc drive I have? It got decent reviews, so I decided to purchase 2 of them. The red & white audio cable are working fine and ... thank you and hoppy I will receive good messege Report prakash- Feb 19, 2010 at 12:51 AM yeah I got same problem and I done it just you can cheng drive

The connection is with a Gigabyte technology band not with a cord unlike my hard drive. Helpful +3 Report casket10 Mar 20, 2009 at 09:54 PM Q: Why won't my DVD player work when I move it over to the extended display? Thread Status: Not open for further replies. Can't Change Contents of ATA/IDE Hard Drive 682 I can't delete or change files on an ATA/IDE drive.

Can't Delete Files from a CD-RW Disc 691 I can't read a particular recordable or rewriteable DVD disc with my DVD drive. Can't Copy or Drag and Drop Files to CD-R or CD-RW Media 689 I can't read CD-RW media in the target computer. Please start a New Thread if you're having a similar issue.View our Welcome Guide to learn how to use this site. Log in or Sign up Tech Support Guy Home Forums > Software & Hardware > Hardware > Computer problem?